Bitzer Condensing Unit

Product Image (BRC-56656)

Cold Room Condensing Unit

Price: 80000 to 650000 INR/Piece

Bohn’s most energy efficient low ambient head pressure control. This system provides year round control of refrigerant head pressure without the use of special refrigerant expansion valves. Resource II combines the benefits of refrigerant subcooling and reduced discharged pressure during mild ambient conditions. As the ambient temperature falls the receiver pressure is allowed to fall to a minimum of 75° F. saturated condensing pressure. The reduced discharge pressure at the compressor increases the compressor capacity and lowers the input watts from the compressor motor. Resource II also uses the reduced ambient temperature to subcool the liquid refrigerant in the condenser. This subcooled liquid also increases system capacity. As a general rule, every one degree of subcooling results in a 1/2% increase in system capacity. Together these result in greater efficiency, greater capacity, and reduced run time. Benefits ■ Automatic year round control of refrigerant head pressure without the use of special expansion valves. ■ Energy savings in mild ambient conditions due to reduced compressor discharge pressure and refrigerant subcooling. ■ Provides easy restart during low ambient conditions. Operation As the ambient temperature falls, the system condensing pressure is also reduced. This pressure is maintained by a regulator (ORl-6-65/225) at the condenser drain. At approximately 75°F. saturated condensing pressure the regulator restricts the flow of liquid refrigerant from the condenser causing the condenser to flood. This condenser flooding allows the liquid refrigerant in the condenser to become subcooled by the ambient air flowing through the condenser. As the regulator continues to flood the condenser a pressure differential will be established between the receiver and the compressor discharge. At a predescribed differential, a second valve (ORD-4) will open and allow discharge gas from the compressor to bypass the condenser and flow into the top of the receiver. This gas is used to pressurize the receiver. Both the inlet and outlet tubes of the receiver have dip tubes which are immersed in liquid refrigerant. The liquid in the receiver acts as an insulator from the vapor area of the receiver. This unique design minimizes the contact of the hot gas used to pressurize the receiver through the ORD-4 valve. This allows bypass vapor to pressurize the receiver while reheat of the subcooled liquid is minimized. Subcooled liquid is further enhanced by the routing of liquid from the receiver liquid line outlet to the condenser before leaving the condensing unit.

Product Image (NJ-4VB5-F)

Bitzer Condensing Unit

Price: 80000 INR/Set

High cooling capacity, the best anti-corrosion performance of each component, reasonable structure of the air-cooled condensing unit, accurate and reliable operation system.Adopt high efficiency high quality fan, low noise, energy saving. The cooling capacity of the air-cooled condensing unit is 0.5kW ~ 100KW.Evaporation temperature :-45℃- +15℃, stable operation at ambient temperature +43℃. 5hp 8hp 10hp 12hp 15hp Hot Refrigeration Unit Air Cooled Open Type Bitzer Condensing Unit For Cold Storage Room

Product Image (BR-20004)

Air Cooled Condensing Unit

Price: Rs.120000 TO 80000000 INR/Piece

5hp 8hp 10hp 12hp 15hp Hot Sale Refrigeration Unit Air Cooled Open Type Bitzer Condensing Unit For Cold Storage Room Condensing units are the the most important component of whole cold room. Condensing unit typically is a high assembly of a refrigeration system which includes an assembly of compressor, condenser, fan motor, controls and a mounting plate. PENGUIN designs and fabricates a versatile line of air cooled, water cooled and remote condensing units ranging from small cold room monoblock refrigeration unit to very large industrial rack refrigeration system.

Product Image (BR- LH104E/4DES-7(Y))

Air Cooled Bitzer Condensing Unit

Price: 80000 to 800000 INR/Piece

With the help of our experienced professionals, we have marked our position as one of the famous manufacturers, suppliers and exporters advance Bitzer Air Cooled Condensing. Our offered product is designed by our team of trained professionals, employing the use of advance techniques. Praised for their features such as excellent performance, silent operation and high corrosion resistance, our Bitzer Air Cooled Condensing is catering the requirements of diary industry,breweries and food freezing plants. Features High cooling with low power consumption Designed for high ambient condition up to 55oC Condensing coil with inner grooved copper tubes & aluminium fins Efficient fans with external motors for single phase and three phase High & low pressure cut-out including mounting brackets, wired to terminal strip Large size filter drier, moisture indicator, solenoid valve, oil separator and accumulator Shell & tube type condenser with high cooling and capacity for high ambient conditions

X


Back to top
BHOOMIKA AIR CONDITION REFRIGERATION All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.